Ova datoteka je s projekta Vikimedijina ostava i može se upotrebljavati i na drugim projektima.
Ispod su prikazane informacije s njene opisne stranice.
Opis izmjene
OpisGlass welding two tubes together.JPG
English: Welding two glass tubes together. The tubes are made of lead glass and are used as filling tubes for neon lighting. The OD is 5mm and the ID is 3mm. The torch is a simple, handheld propane-torch, and the tubing is held right at the tip of the flame to avoid overheating the glass (which causes the lead to conglomerate at the surface, making the glass appear metallic). The welding is accomplished by heating the glass to red-hot while spinning the tubes to prevent cracking. Holding then at a slight angle, the edges are touched together and rotated to seal it together around the circumference. Then pressing to fatten the weld and pulling to thin the weld to the necessary 1 mm thickness, all while blowing slightly to maintain a tubular shape. This photo was taken the moment the two tubes touch.
Osoba koja je učestvovala u radu na ovom dokumentu posvetila je rad javnoj domeni odricanjem od svih svojih prava na taj rad širom svijeta po zakonu o autorskim pravima i svim povezanim zakonskim pravima koja bi imao/imala, u mjeri dopuštenoj zakonom. Možete kopirati, mijenjati, distribuirati i prilagođavati rad, čak i u komercijalne svrhe, bez traženja dopuštenja.
http://creativecommons.org/publicdomain/zero/1.0/deed.enCC0Creative Commons Zero, Public Domain Dedicationfalsefalse
Opisi
Dodajte objašnjenje u jednom redu što predstavlja ova datoteka
Ova datoteka sadrži dodatne podatke koje je vjerovatno dodala digitalna kamera ili skener tokom snimanja ili digitalizacije. Ako je datoteka mijenjana, podaci možda nisu u skladu sa stvarnim stanjem.