Datoteka:Extruder section.jpg

Izvor: Wikipedija
Prijeđi na navigaciju Prijeđi na pretragu

Izvorna datoteka ‎(1.024 × 572 piksela, veličina datoteke/fajla: 72 kB, MIME tip: image/jpeg)

Ova datoteka je s projekta Vikimedijina ostava i može se upotrebljavati i na drugim projektima. Ispod su prikazane informacije s njene opisne stranice.

Opis izmjene

This diagram image could be re-created using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{vector version available|new image name}}.


It is recommended to name the SVG file “Extruder section.svg”—then the template Vector version available (or Vva) does not need the new image name parameter.
This diagram image was uploaded in the JPEG format even though it consists of non-photographic data. This information could be stored more efficiently or accurately in the PNG or SVG format. If possible, please upload a PNG or SVG version of this image without compression artifacts, derived from a non-JPEG source (or with existing artifacts removed). After doing so, please tag the JPEG version with {{Superseded|NewImage.ext}} and remove this tag. This tag should not be applied to photographs or scans. If this image is a diagram or other image suitable for vectorisation, please tag this image with {{Convert to SVG}} instead of {{BadJPEG}}. If not suitable for vectorisation, use {{Convert to PNG}}. For more information, see {{BadJPEG}}.
This image was uploaded in the JPEG format even though it consists of non-photographic data. This information could be stored more efficiently or accurately in the PNG or SVG format. If possible, please upload a PNG or SVG version of this image without compression artifacts, derived from a non-JPEG source (or with existing artifacts removed). After doing so, please tag the JPEG version with {{Superseded|NewImage.ext}} and remove this tag. This tag should not be applied to photographs or scans. If this image is a diagram or other image suitable for vectorisation, please tag this image with {{Convert to SVG}} instead of {{BadJPEG}}. If not suitable for vectorisation, use {{Convert to PNG}}. For more information, see {{BadJPEG}}.
Opis
English: Plastic extruder cut in half and labeled.
Datum 11. juni 2006. (izvorni datum postavljanja)
Izvor Transferred from en.wikipedia to Commons.
Autor Mikeeg555 na Wikipedia na Engleski

Licenciranje

Public domain Ovaj rad je objavljen u javno vlasništvo od strane autora Mikeeg555 na Wikipedia na Engleski. Ovo se primjenjuje širom svijeta.
U nekim državama ovo zakonski nije moguće; u tom slučaju:
Mikeeg555 dopušta svima pravo korištenja ovog rada u bilo koju svrhu, bez ikakvih uslova, osim ako su takvi uslovi zakonski neophodni.

Izvorna evidencija postavljanja

The original description page was here. All following user names refer to en.wikipedia.
  • 2006-06-11 12:41 Mikeeg555 1024×572×8 (73279 bytes) Plastic extruder cut in half and labeled.

Opisi

Dodajte objašnjenje u jednom redu što predstavlja ova datoteka

Predmeti pokazani na ovoj datoteci

prikazuje

nastanak

11 juni 2006

Historija datoteke

Kliknite na datum/vrijeme da biste vidjeli tadašnju verziju datoteke.

Datum/vrijemeMinijaturaDimenzijeKorisnikKomentar
aktualna14:13, 7 april 2008Minijatura verzije (14:13, 7 april 2008)1.024 × 572 (72 kB)File Upload Bot (Magnus Manske) {{BotMoveToCommons|en.wikipedia}} {{Information |Description={{en|Plastic extruder cut in half and labeled.}} |Source=Transferred from [http://en.wikipedia.org en.wikipedia] |Date=2006-06-11 (original upload date) |Author=Original uploader was [[:en:User

Sljedeća stranica koristi ovu datoteku:

Globalna upotreba datoteke

Ovu datoteku upotrebljavaju i sljedeći projekti:

Metapodaci

Ova datoteka sadrži dodatne podatke koje je vjerovatno dodala digitalna kamera ili skener tokom snimanja ili digitalizacije. Ako je datoteka mijenjana, podaci možda nisu u skladu sa stvarnim stanjem.

Izvor: https://sh.wikipedia.org/wiki/Datoteka:Extruder_section.jpg